It would be reasonable to expect that a dental crown could last between five and fifteen years. Most likely a crown that has only lasted five years would be somewhat of a disappointment to your dentist. It’s probably their hope that any crown they make for you will last ten years or longer. Depending upon the general wear and tear the crown is exposed to (chewing and biting forces, accidental trauma, tooth grinding) and how well you keep its tooth free of dental plaque, a crown can last somewhat indefinitely.
There can be a variety of reasons why a dental crown might need to be slated for replacement. They include: damage to the tooth crown, excessive wear, complications with tooth decay, failed cosmetic appearance.
Dental crowns are not necessarily more wear resistant than your own natural teeth, nor is it in your best interest that one should be. The ideal dental crown would be one made out of a material that has the same wear characteristics as tooth enamel. This way neither the crown nor your own natural teeth will wear the other excessively.
Especially in those cases where a person has a habit of clenching and grinding their teeth, a dentist will sometimes detect a small hole on the chewing surface of a crown where it makes contact with an opposing tooth (a tooth that touches the crown when you bite down). Since the seal of the crown has been compromised, a new crown should be made before that point in time when dental plaque has had a chance to seep under and start a cavity. In some cases, it may be observed that a crown in causing excessive wear of the person’s opposing natural teeth. If so, one solution might be to make a replacement crown from a different type of material (gold, dental ceramic) that is less abrasive to tooth enamel.
While a dental crown can’t be damaged by decay, the tooth on which it’s cemented certainly can be. This means that if dental plaque is allowed to accumulate on a tooth in the region beyond the edges of the crown, a cavity can start.
The worst-case scenario for a dental crown in this situation is that in order to be able to access the cavity, the dentist will need to take off the existing crown (an act that may or may not damage it). After the decay has been removed, in most cases ideal treatment involves making a new replacement crown.
Dental crowns can break, or more precisely the porcelain component of one may fracture. With the exception of those that have worn excessively, it’s rare to see an all-metal (gold) crown break. Some dental crowns are made in a fashion where their full thickness is porcelain (all-ceramic crowns, porcelain jackets). If one of these crowns fractures, it will likely break all of the way through, thus compromising the crown’s integrity and seal, and therefore mandating its replacement.
Another type of ceramic dental crown is of the “porcelain-fused-to-metal” variety. When this type of crown is fabricated the dental technician first makes a thin metal shell that fully covers over the tooth. A layer of porcelain is then fused to this metal so to give the crown a tooth-like appearance. In cases where a porcelain-fused-to-metal crown has broken, it’s the layer of porcelain that has fractured off (usually revealing the metal that lies underneath, which is typically grey in appearance). While the function and aesthetics of the crown may have been compromised, the crown’s seal over the tooth has probably not been affected.
Any dental crown that has broken should be evaluated by your dentist. Some minor damage might not be of much concern, and possibly remedied by buffing the area with a drill. In other cases, the crown will need to be replaced. Only your dentist can make this treatment determination, and only after they have had an opportunity to evaluate your specific situation.
Some dental crowns are replaced because their appearance is no longer pleasing. Two situations where the cosmetic nature of a dental crown can change with time are:
Sometimes, over time, the gum line of a tooth will recede. This is especially likely in those cases a person has been lax with their brushing and flossing activities. If enough recession takes place, the edge of a dental crown (which was originally tucked out of sight just under the gum line) will become visible. Inherent to porcelain-fused-to-metal crowns is the fact that their edge will typically show some darkness (a hint of the grey metal that lies underneath the porcelain). If enough gum recession occurs, this dark edge will become visible, thus spoiling the cosmetic appearance of the crown.
All-porcelain dental crowns do not suffer from this same inherent edge darkness. However, gum recession can expose that portion of the tooth (usually the root) that lies beyond the edge of the crown. Usually this part of the tooth appears darker or different in comparison to the colour of the dental crown, thus spoiling the overall cosmetic appearance of the tooth.
There can be times when, as years have elapsed, the colour of a crown no longer closely matches the shade of its neighbouring teeth. In these cases, it is not that the colour of the porcelain crown has changed but instead that the neighbouring teeth have stained and darkened.
There can be two solutions for this situation. One is to replace the offending crown with a new one that more closely matches the current colour of its neighbouring teeth. Another is to use a teeth-whitening process in an attempt to return the neighboring teeth back to the colour they were when the dental crown was originally placed.